这个AA2的测距仪怎么用啊？

sanmao2007

有人发的AA2用测距仪
不知道怎么在编辑器里用，哪位大侠给指导指导啊，不胜感激！！！
说明：
TCP_RF Client Addon v07 20091211
Requires: CBA
Examples from NWD_Rangefinder by NonWonderDog, Digital Compass by ffs, Mando Missile by Mandoble, and gdtmod_binocular by Heinbloed

Laser Rangefinder is a remake of NWD_Rangefinder.
It works with or without NWD optics model (31st MEU reticle pack).

Features:
Range, Azimuth, and Elevation output
Indicators for Battery, Laser active/transmitting, Overheat, and Mutiple Laser Targets detected
Battery life and overheat conditions exist and are configurable

Instructions:
Check userconfig\TCP_RF\TCP_RF.hpp for preferences.
XMIT (Laser active) will indicate when the laser is on. MLT (Multiple Laser Targets) will indicate when any other lasers besides your own are detected.
BAT (Battery) will start green and become red at 2/3 life. It will start to fade as battery level decreases. It will start flashing when below 1/4 life.
Battery is "loaded" into display so that it doesn't take up space. You can carry spares if needed. You can force a battery change at any time with Ctrl+Alt+Shift R (by default).
HOT (Overheat) will light up when it reaches the preset overheat temperature. It will become brighter as it increases to critical (maxm) temperature.
It start flashing when its very near critical temperature. There is a chance of burnout when you go above critical temperature.
Use Alt-R (by default) to cycle between different Mil measurements as well as degrees.
Many thanks to the original addon makers as this is simply a recoding of their work, most of it borrowed.

For Mission Makers:
To enforce your own battery and overheat conditions, copy TCP_enfRF.sqf to your mission folder.
Put this at the end of init.sqf:
[] spawn {execVM "TCPenfRF.sqf";};


v07 Changelog
- Fixed incompatibility due to set instead of add display event handler

v06 Changelog
- Cycle between Mil measurements
- Ctrl+Alt+Shift+R forces battery changes, optionally w/o designator active
- More responsive, code rewritten
- State changes fixed, shuts off when in third person, or moving
- Display turns on with laser, and Laser turns off with display (enforces battery and overheat conditions)

v05 Changelog
- Mapped to customizable key
- Overheat and battery levels

v04 Changelog
- Fixed interface scaling regardless of resolution / interface size
- Added Azimut, Elevation, and indicator lights
- Action only visible when using Designator

v03 Changelog
- Converted to addon
- Copied NWD textures/dialogs
- Created player action (always visible)

v02 Changelog
- using positionCameratoWorld as recommended by Mandoble
- smoother, but still need to use Shift + Move (Walk Forward) if it shuts off.

v01 Changelog:
- borrowed animations from gdtmod_binocular by Heinbloed
- borrowed laser finding from mando missile by Mandoble
- animation detection not reliable but works

十四

要有CBA插件，测距仪要装电池。话说这个跟ACE里面的测距仪有什么区别吗？

sazpc

游戏自带的镭射指引设备就可以测距

sanmao2007

CBA到有，关键是怎么调出来啊？

十四

sanmao2007 发表于 2010-9-25 19:14
CBA到有，关键是怎么调出来啊？

要装电池的，把电池和测距仪都放身上，然后滚轮选择使用测距仪，右键进入瞄准（实在想不出该用什么词，凑活着看吧……），然后按R，这时候应该在画面上会显示XXX°，这个就是装好电池的标志了，那个度数是你面对的方位。最后按左键，会出现一个红点，指向你要测距的地方，过一会就会出现距离了

sanmao2007

回复 十四 的帖子

谢了，我试试看！